Table of Contents
Advertisement
Unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling or operating pressure washer. If
there are missing components or hidden damage imme-
diately contact distributor or carrier concerning discrep-
ancies.
1.
Cut strapping band from pressure washer and pal-
let.
2.
Remove pressure washer from pallet.
Parts Included
• Pressure Washer
• Pressure Hose
• Hose Hanger
• Wand
• Wand Holder
• Parts Box Containing:
■ Pressure Nozzles (3 ea.)
■ Trigger Gun
• Operating Instructions and Parts Manual
Tools Required
• 10" Adjustable Crescent Wrenches (2 ea.)
• Blade Screwdriver
Pressure Hose, Wand and Wand Holder
1.
Use teflon tape on plumbing connections to prevent
leakage.
2.
Install pressure hose on machine as shown.
Pressure Hose
10
ASSEMBLY INSTRUCTIONS
Rupture Disk
97-6574 • HOTSY 900-1400 GAS FIRED • REV. 10/05
3.
Assemble wand components as shown. Connect
pressure hose to trigger gun.
Quick Disconnect Plug
Trigger Gun
Pressure Hose
NOTE: The nozzle is not to be installed at this time.
4.
Make sure that all plumbing connections are tight.
Hose Hanger
1.
Install the hose hanger on the machine coil tank as
shown.
Hose Hanger
Wand
Quick
Disconnect
Pocket On
Coil Tank
Hide quick links:
Advertisement
Table of Contents
