9.
To install and connect the additional wiring harnesses
A10
A12
A11
C2
Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)
Installation instructions No. 01 29 0 028 872
Screw branch A10, cable eyelet 6 mm in
diameter on the power supply wiring harness A,
to the earth post X13016.
X13016
Lay branches A11, A12, B2 and C2 to the
installation site of the navigation computer.
B2
F 46 1178 B
Issue date: 06.2002
EN/13