NordicTrack Competition 831.15718.0 User Manual page 10

11. Slide the Weight Stop (32) onto the post on the
Leg Lever (11). Next, tighten the Weight Tube
(33) onto the post. Then, attach the Weight Clip
(46) to the Weight Tube.
Next, grease the outside of the barrel of an M10 x
111mm Bolt Set (63). Attach the Leg Lever (11) to
the Front Leg (3) with the Bolt Set. Make sure
that the barrel of the Bolt Set is inserted
through both sides of the bracket on the Front
Leg.
12. Insert the Long Pad Tube (8) into the Front Leg
(3). Slide two Foam Pads (21) onto the Long Pad
Tube. Then, press a Pad Cap (22) into each
Foam Pad.
13. Insert the two Short Pad Tubes (15) into the Leg
Lever (11). Slide two Foam Pads (21) onto each
Short Pad Tube. Then, press a Pad Cap (22) into
each Foam Pad.
11
33
46
12
22
21
13
22
21
11
21
10
63
3
11
Grease
32
3
21
8
15
21
22
15
21
63
22
22