General Settings - Psm - JVC KD-AR390 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 23.
1
Enter the PSM settings.
2
Select a PSM item.
Indications Item
( : Initial)
DEMO • DEMO ON
Display
• DEMO OFF
demonstration
CLOCK DISP * • CLOCK ON
1
Clock display
• CLOCK OFF
CLOCK HOUR 1 – 12
Hour adjustment
CLOCK MIN 00 – 59
Minute adjustment
CLOCK ADJ * • AUTO
2
Clock adjustment
• OFF
TIME ZONE * * —
2, 3
Time zone
DST * * • DST ON
2, 3
Daylight savings
time • DST OFF
22
EN20-29_KD-AR390[J]f.indd 22
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Setting, [reference page]
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
[Initial: 1 (1:00)], [4].
[Initial: 00 (1:00)], [4].
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
: Select your residential area from one of the time zones for clock
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
: Activates daylight savings time if your residential area is subject to
DST.
: Cancels.
9/24/07 4:36:31 PM