General Settings - Psm - JVC KD-PDR31 Instructions Manual

Hide thumbs Also See for KD-PDR31:
Table of Contents

Advertisement

Available languages

Available languages

Indication, [Range]
BAS *
(bass), [–06 to +06]
1
Adjust the bass.
MID *
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE *
1
(treble), [–06 to +06]
Adjust the treble.
FAD *
2
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS *
1
(super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03]*
3
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
VOL (volume), [00 to 30 or 50 *
Adjust the volume.
*
1
When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including "USER."
*
If you are using a two-speaker system, set the fader
2
level to "00."
*
3
Range adjustment for super bass is adjustable only
when it is set to "S.BS ON."
*
4
Depending on the amplifier gain control setting. (See
page 17 for details.)
4
]
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Continued on the next page
15

Advertisement

Table of Contents
loading

Table of Contents