Philips S5000 series Manual page 35

Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Possible cause
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
without cord.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving unit is
soiled or damaged to
such an extent that
the motor cannot
run.
ENGLISH
Solution
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads by
following the steps of the
thorough cleaning method
(see chapter 'Cleaning and
maintenance').
Disconnect the shaver
from the mains and press
the on/off button to switch
on the shaver (see section
'Unplug for use reminder').
Recharge the battery
(see chapter 'Charging').
Press the on/off button
for 3 seconds to deactivate
the travel lock.
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
and 'Replacement').
35