Using The Trimmer Attachment; Using The Beard Styler Attachment; Using The Beard Styler Attachment With Comb - Philips S5000 series Manual

ENGLISH
16

Using the trimmer attachment

You can use the trimmer attachment to groom
your sideburns and moustache.
1 Make sure the appliance is switched off.
2 Insert the lug of the attachment into the slot
in the top of the shaver. Then press down
the trimmer attachment to attach it to the
appliance ('click').
3 Switch on the appliance.
4 You can now start trimming.
5 Clean the attachment after use (see chapter
'Cleaning and maintenance').

Using the beard styler attachment

1 Make sure the appliance is switched off.
2 Insert the lug of the attachment into the slot
in the top of the appliance. Then press down
the attachment to attach it to the appliance
('click').

Using the beard styler attachment with comb

You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings. You can
use it also to pre-trim any long hairs before shaving
to have a more comfortable shave.
The hair length settings on the beard styler
attachment correspond to the remaining hair length
after cutting and range from 1 to 5mm.
1 Slide the comb straight into the guiding
grooves on both sides of the attachment
('click').