The server exits standby mode and applies full power to the system. The system power LED changes
14.
from amber to green.
HP Smart Array controller Mini-SAS Y-cable option
Press the Power On/Standby button.
1.
The server powers down and enters standby mode. The system power LED changes from green to
amber. Power is still applied to the server.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
If the server is in a tower configuration, do the following:
3.
Unlock and remove the tower bezel.
a.
Hardware options installation 72