Table of Contents
Advertisement
Adjusting airflow direction
When operating multiple indoor units using 1 remote controller, airflow direction can be adjusted for indoor each unit individually or
all units at the same time.
Unit No.
"FLAP" button
"UNIT" button
Attention:
Never use your hands to move the flap (vertical airflow flap)
z
controlled using the remote controller.
Note
When the air conditioner is turned off, the flap automatically
z
moves toward the direction of closing.
The flap (vertical airflow flap) moves to the upward position
z
during standby operation for heating.
The swing operation starts after the standby operation has
z
finished, but "Swing" is indicated on the remote controller
even during the standby operation.
for multiple indoor units (Timer remote controller only)
1-1
2-1
3-1
4-1
8-1
Maximum of
z
8 indoor units
can be connected.
„ When setting the airflow direction of
each indoor unit individually
1
Press
e.g.) 8 outdoor unit
No display
1-1
2-1
3-1
4-1
8-1
2
Press
„ When setting the airflow direction of
all indoor units at the same time
1
Press
2
Press
Tips for Energy Saving
„ Avoid
Do not block the air intake and outlet of the unit.
z
(If either is obstructed, the unit will not function
well, causing malfunction.)
During cooling operation, use sunshades, blinds or cur-
z
tains to prevent direct sunlight from entering the room.
„ Do
Always keep the air filter clean.
z
(A clogged filter will impair the performance of the unit.)
→ "Maintenance" (P.8)
To prevent conditioned air from escaping, keep win-
z
dows, doors and any other openings closed.
to select the Unit No.
for adjustment.
to select your desired
airflow direction.
to select
.
No display
to select your desired
airflow direction.
7
Hide quick links:
Advertisement
Table of Contents
