Connect; Place The Unit; Connect Speakers - Philips FWD410 User Manual

3 Connect

Place the unit

1
Place the unit near the TV.
2
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•
To avoid magnetic interference or unwanted noise,
never place both the main set and speakers too close
to any radiation devices.
•
Place this unit on top of a table.
•
Never place this unit in an enclosed cabinet.
•
Place this unit near the AC outlet where the AC power
plug can be easily reached.
FWD410_UM_98_EN_V2.0.indd 11

Connect speakers

Note
•
For better sound effect, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
specifications section of this manual.
1
On the back of the main set, find the left
and right speaker sockets.
2
Check that the colors and polarities of the
speaker cables match those of the speaker
sockets.
3
Insert the speaker wires into the
corresponding speaker sockets.
a b
HIGH
HIGH
LOW
c
EN
11
11/29/2013 4:15:47 PM