4. Use the 2x2 grid to create a sequence of knocks (or taps) to set your knock code.
Note: You have to create a Backup PIN as a safety measure in case you forget your unlock
sequence.
To unlock the phone using Knock Code:
While the screen is off, tap the same sequence you established anywhere on the screen. The
n
Home screen will be accessed directly.
Hardware Key Control Mode
If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn off
an alarm using the hardware keys.
1. Turn your phone off.
2. Press and hold the Power/Lock Button
for more than 6 seconds to enter the Hardware key control mode.
3. Press the Volume Keys
Button
to confirm.
Answer a call: Press the Volume Up Key and the Volume Down Key at the same time.
l
Stop alarm: When an alarm rings, press and hold the Volume Up Key or Volume Down
l
Key to stop the alarm.
Note: If you use your phone with a broken display glass, your phone can break even more or you
can be injured. Make sure to visit the LG authorized service center to get your phone repaired.
Phone Basics
and the Volume Keys
to scroll to the desired option, then press the Power/Lock
at the same time
14