Table of Contents
Advertisement
Turn Your Phone On and Off
Turn your phone on and off and wake-up the screen by using the Power/Lock Button
Turn Your Phone On
Press and hold the Power/Lock Button
n
Once your phone is on, it may display "Searching for Service." When your phone finds a signal, it
enters standby mode – the phone's idle state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You
can also initiate a search for Sprint service by pressing any key (when your phone is turned on).
Tip: The Power Save feature conserves your battery power when you are in an area where there is
no signal.
Turn Your Phone Off
1. Press and hold the Power/Lock Button
on the display screen.
2. Tap Power off and then tap OK to power off the phone.
Your screen remains blank while your phone is off (unless the battery is charging).
Wake Up the Screen
If you don't use the phone for a while, the screen and backlight will shut off to conserve battery
power.
1. Press the Power/Lock Button
2. Swipe the screen to any direction to unlock it. The last screen you were working on opens. (This
is the default lock screen.)
Note: When turning the screen on, make sure you do not cover the proximity sensor. Doing so will
not allow you to turn the screen on.
Screen On/Off
The KnockON feature allows you to double-tap the screen to easily turn it on or off. You can enable
and disable this feature in the Gestures settings.
Phone Basics
.
for two seconds until you see the Phone options
. Your lock screen will appear. See Lock Screen.
.
11
Advertisement
Table of Contents
