Connecting to the Computer
To connect your computer to the printer's built-in parallel
interface, you need a shielded, twisted-pair parallel interface
cable that is IEEE-1284 compatible.
Your printer also has room for an optional Type-B interface
connector. See "Installing an Interface Card" on page 22 for more
information.
1. Make sure both the printer and the computer are off.
2. Attach the parallel interface cable to the printer as shown.
Note:
Use only a shielded, twisted-pair parallel cable.
3. Plug the other end of the cable into the computer's parallel
interface connector.
26
Testing and Connecting the Printer