Nokia TransACT N91 8GB Owner's Manual page 104

Nokia cell phone owner's manual
Hide thumbs Also See for TransACT N91 8GB:
Table of Contents

Advertisement

voice calls. To check the active data connections, see
'Connection manager', p. 94.
The following indicators may be displayed below the
signal indicator, depending on which network you use:
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
UMTS network, packet data is available in the network.
UMTS network, packet data connection is active, data
is being transferred.
UMTS network, multiple packet data connections are
active.
UMTS network, packet data connection is on hold.
Access points
Some or all access points may be preset for your device by
your service provider or network operator, and you may
not be able to change, create, edit, or remove them.
indicates a protected access point. You may also receive
104
Copyright © 2006 Nokia. All rights reserved.
access point settings in a text message from a service
provider. See 'Data and settings', p. 44.
Tip! See also 'Receive MMS and e-mail settings', p. 43,
'E-mail', p. 51, and 'Access point for Services', p. 84.
indicates a packet data access point, and
wireless LAN access point.
To create a new access point, press
Settings
>
Connection
>
Access points
access
point.
Follow the instructions given to you by your service
provider.
Connection
name—Give a descriptive name for the
connection.
Data
bearer—Depending on what data connection you
select, only certain setting fields are available. Fill in all
fields marked with
Must be defined
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
a
, and select
Tools
>
>
Options
>
New
or with a red asterisk.

Advertisement

Table of Contents
loading

This manual is also suitable for:

N91

Table of Contents