Call Settings - Nokia TransACT N91 8GB Owner's Manual

Standby mode
Active standby—Use shortcuts to applications in the
standby mode on the display. See 'Active standby mode',
p. 29.
Left selection key—To assign a shortcut to the left
selection key (
application from the list.
Right selection
selection key (
application from the list.
Active standby
you want to appear in the active standby mode, select the
applications from the list. This setting is only available if
Active standby
You can also assign shortcuts to different movements of
the joystick. Select the application for each movement
from a list. The joystick shortcuts are only available if
Active standby
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose
whether you want the operator logo to show or not.
Display
Brightness—You can change the brightness of the display
to be lighter or darker.
102 Copyright © 2006 Nokia. All rights reserved.
) in the standby mode, select an
key—To assign a shortcut to the right
) in the standby mode, select an
apps.—To select the application shortcuts
is on.
is off.
Power saver time-out—The power saver is activated when
the time-out period is over.
Light time-out—Select a time-out after which the
backlight of the display is switched off.

Call settings

Send my caller ID (network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person to whom you are calling, or the value may be
set by your network operator or service provider when you
make a subscription (Set by
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select
request the network to activate call waiting,
request the network to deactivate call waiting, or
status to check if the function is active or not.
Reject call with SMS—Select
to a caller informing why you could not answer the call.
See 'Answer or reject a call', p. 33.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of ten attempts to connect the call after an
network).
Activate to
Cancel to
Check
Yes to send a text message