require service. Additional charges may apply, and
all the personal data in your device may be deleted.
For more information, contact a Nokia Care Centre
or your device dealer.
Personal Unblocking Key (PUK) code and PUK2
●
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with the
SIM card, contact the network service provider
whose SIM card is in your device.
UPUK code — This code (8 digits) is required to
●
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the network
service provider whose USIM card is in your device.
International Mobile Equipment Identity (IMEI)
●
number — This number (15 or 17 digits) is used to
identify valid devices on the GSM network. Devices
that are, for example, stolen, can be blocked from
accessing the network. The IMEI number for your
device can be found under the battery.
Remote lock
To prevent unauthorised use of your device, you can
lock your device and memory card remotely using a
text message. You must define the text message, and
to lock your device, send the text message to your
device. To unlock your device, you need the lock code.
12
To enable remote locking, and to define the text
message, select
Menu
>
Phone mgmt.
Security settings
>
SIM card
Remote phone locking
>
the text input field to enter the text message content
(5-20 characters), select
Enter the lock code.
Prolong battery life
Many features in your device increase the demand on
battery power and reduce the battery lifetime. To save
battery power, note the following:
Features that use Bluetooth technology, or allowing
●
such features to run in the background while using
other features, increase the demand on battery
power. Deactivate Bluetooth technology when you
do not need it.
Features that use wireless LAN (WLAN), or allowing
●
such features to run in the background while using
other features, increase the demand on battery
power. WLAN on your Nokia device deactivates
when you are not trying to connect, not connected
to an access point, or not scanning for available
networks. To further reduce battery consumption,
you can specify that your device does not scan, or
scans less often, for available networks in the
background.
Settings
and
Phone
>
Phone and
>
> Enabled. Tap
, and verify the message.