Synchronise Data - Nokia N90-1 User Manual

2 Define the following:
Sync profile
profile.
Data bearer—Select the connection type: Web, or
Bluetooth.
Access point
Web)—Select an access point to use for the data
connection.
Host address—The IP address of the host server.
Contact your service provider or system administrator
for the correct values.
Port (shown only if
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the synchronisation
server. Contact your service provider or system
administrator for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow sync requests—Select
the server to start a synchronisation.
Accept all sync
device to ask you before a synchronisation initialised by
the server is started.
104
name—Write a descriptive name for the
(shown only if Data bearer
Data bearer is set to Web)—
Yes if you want to allow
reqs.—Select No if you want your
Copyright © 2005 Nokia. All rights reserved.
Network authentic.
to Web)—Select
password. Press
password fields.
Press
• Select
is set to
database.
•
In Remote
remote calendar, address book, or notes database on
the server.
• Select
synchronisation),
3 Select
view.

Synchronise data

In the Sync
synchronisation profiles and the kind of data to be
synchronised.
1
Select a synchronisation profile and Options>
Synchronise. The status of the synchronisation is
shown at the bottom of the screen.
To cancel synchronisation before it finishes, select
Cancel.
(shown only if
Yes to enter a network user name and
to view the user name and
to select Contacts, Calendar, or Notes.
Yes if you want to synchronise the selected
database, enter a correct path to the
Synchronisation type: Normal
To server only, or
Back to save the settings and return to the main
main view, you can see the different
Data bearer is set
(two-way
To phone only.