Share Video - Nokia N90-1 User Manual

Nokia cell phone user guide
Table of Contents

Advertisement

If you know a recipient's SIP address, you can enter it on
your contact card for that person. Open
your device main menu, and open the contact card (or start
a new card for that person). Select
>
Web
address. Enter the SIP address in a format
sip:username@domainname (you can use an IP address
instead of a domain name).
UTMS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
"Connection
settings", p. 108.

Share video

To receive a sharing session, the recipient must install
Video sharing
and configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Live video
Contacts
from
1
Options
>
Add detail
2
3
4
5
Video clip
1
Copyright © 2005 Nokia. All rights reserved.
When a voice call is active, select
video
> Live.
The phone sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and
Select
If the SIP address of the recipient is not available, enter
a SIP address. Select
OK
to send the invitation.
Sharing begins automatically when the recipient
accepts the invitation, and you activate the Imaging
mode. See
"Imaging
mode", p. 12.
When you activate the Imaging mode, the loudspeaker
is active. You can also use a headset to continue your
voice call while you share live video.
Select
Pause
to pause the sharing session. Select
Continue
to resume sharing.
To end the sharing session, in the Imaging mode, return
to the Fold open mode. To end the voice call, press the
End key.
When a voice call is active, select
video
> Clip.
A list of video clips opens.
Options
>
Share
to send the invitation.
Options
>
Share
31

Advertisement

Table of Contents
loading

Table of Contents