Multiple Exposure (Me) Lever Adjustment - Canon A-1 Repair Manual

Cathode (thick)
Mark
LED
A/ T Dial
C
---''Pattern
Fig. 2-23
Fig. 2-24
2.19 Multiple Exposure (ME) Lever Adjustment
1. Wind the camera.
2. Install the parts as shown in figure 2-25.
3. Set the ME Coupler (CF1-0240-000) in the detent
activated position.
4.
With the ME mechanism set as described in step 3, it
should be possible to push the winding reset lever
in the "A" direct~ on as shown in figure 2-26.
5. Wind the camera halfway and stop.
6. In this condition it should be possible to move the
ME coupler a considerable amount in the setting
direction but not enough to set the detent.
7. Adjust step 4 and step 6 with the eccentric screw
shown in figure 2-26.
<iPl
E Ring
I-
~:;;:;;;;:'"
~
~
Spr i ng .
I.J
(CSl- 5181)
J
L __ _ _
Fig _ 2-25
ME Shaft
(CFl-0237)
39