Philips speechair psp1000 series User Manual page 43

X When the firmware update has finished,
SpeechAir restarts automatically.
Update the firmware with SpeechAir management
software
Note
• On Mac computers, it is only possible to update
the firmware manually with the update.img file as
described in Update the firmware
1
Download the firmware update file update.safw
from the website www.philips.com/dictation
computer.
2
Start Philips SpeechAir management software.
3
Make sure that SpeechAir is turned on and connect
the device to your computer.
4
On the device configuration window of the software,
go to SpeechAir > Firmware, and select the firmware
file on your computer.
5
Click Send to SpeechAir on the tool bar.
X A pop-up window confirming the successful
configuration transfer appears.
6
To apply the configuration to SpeechAir, disconnect
the device from the computer.
X The Update pop-up window appears on your
SpeechAir.
7
Tap Update now. If you want to update the firmware
at a later time, tap Postpone for 2 hours. You can
postpone the update three times. Afterwards,
the device will inform you that the firmware will
automatically be updated.
X SpeechAir turns off and starts the installation of
the update file.
X You can see the progress of the installation on the
screen.
X When the firmware update has finished,
SpeechAir restarts automatically.
manually.
to your
Device and data management 43