Page 34
Line in 录音: Line in 录音是通过双声道音频线, 将本机与外部音源设备的 音频输出接口正确连接,即可将外部音源的声音转录至本机(音 源设备如收音机、CD、VCD、DVD 等) 。正确操作方法为使用附 送的双声道音频线,一端连接外部音源输出口,另一端接本机的 “Line in ” 插孔。 录音操作方式和使用麦克风录音相同。 Line in 录音前,请把外部音源调到一个适度值,否则录出来的文件声音 失真。 (4) 声控设置 声控录音功能一旦被启用,录音过程中,当机器检测到有声 音时,录音笔会自动开始录音;当未检测到声音时,录音笔在 3 秒后将自动暂停录音;再次检测到声音时,录音笔又会自动开始 录音。声控设置参考界面图片如下:...
Content 1 Welcome 2 Important 3 Your Voice Tracer digital recorder 4 Start to Use 5 Voice Recording 6 Video Recording 7 Voice Mode 8 Music Mode 9 Video Mode 10 Radio Mode 11 Setting Mode 12 Frequently Asked Questions 13 Technical Parameters...
1 Welcome Welcome to the world of Philips! We are honored by your choice purchase Philips’ products. You can have Philips’ comprehensive technical supports from our website, e.g. user’s manuals, software downloading and warranty information etc. www.philips.com Product Features • One-touch voice recording: Just turn on the recording switch to start recording, turn off to save file.
2 Important Safety • To avoid a short circuit, do not expose the product to rain or water. • Do not expose the device to excessive heat caused by heating equipment or direct sunlight. • Protect the cables from being pinched, particularly at plugs. Attention! Before using the device please read this User’s Manual carefully.
Page 45
Do not use the earphones when driving, cycling, and skateboarding to avoid traffic accident and violating laws and regulations.
(1) When the power switch is in OFF position, the device is cut off from power and can’t switch on. (2) When the power switch is slid to “ON”, the device starts automatically and then displays “PHILIPS”, See the picture as follow: Then the device displays the stop playing interface. On this interface, press MENU button for 2 or 3 seconds to return to the main interface.
Page 49
“Goodbye” is displayed, and then the device is switched off. Switch on: When in the power-off state, press the PLAY button until the startup logo “PHILIPS” is displayed. Note: • The device has a built-in lithium battery. If the device is idle for a long time, please slide the power switch to the “OFF”...
Page 50
• When the device is working, please do not cut off the power, otherwise damaged file or malfunction may occur. • When the battery indicator “ ” is displayed, please charge the device promptly. • Do not format memory and card on PC , otherwise negative impacts may happen to some fuctions of the device.
Page 51
manually. Key Lock (HOLD Function) (1) Slide the HOLD switch to lock position to lock all the buttons on the device, except the slide switch of recording. Then “Hold” is displayed for a while and disappears as shown in the following picture.
Page 52
Note: When moving files into or out of the device, please do not disconnect the device from the computer. While the device is connected to a computer, it cannot be operated manually.
5 Voice Recording Before using the device, please read carefully the following instructions. (1) Slide the record switch to “REC” to start recording; the “Record/Play” indicator flickers red; please place the built-in microphone towards the source of sound. (2) Press “PLAY” button to pause recording, then the red light flickers, and the display shows “Pause”.
Page 54
Illustration of Recording Interface: Note: When the low battery icon appears, it means the battery is nearly empty and the system will automatically shut down. If the device is recording, the system will automatically save the recorded file then shut down. If the device has low battery, please recharge promptly. After the device shuts down on low battery, the following icon will display.
Page 55
each folder can store up to 99 audio files. If one folder is full with 99 files, the system automatically stores the subsequent files in the next folder. In the case that all four folders are full, please delete some unnecessary files to enable recording. •...
Page 56
plug of the external microphone must be stereo plug as shown in the picture below.
6 Video Recording When you use this voice recorder to record video for the first time, please read the contents in this section! (1) The record video file is stored in the folder named VIDEO, which can maximally store 99 files. If the folder is fully loaded but you need to take another video record, please delete some unnecessary files before recording.
7 Voice Mode On the main interface you can select the voice mode with “ ” or “ ” buttons, and then shortly press the menu button to enter. Please refer to the Voice Stop interface below: Voice Playback Interface Specification: Audio Playback (1) In the Stop Mode of recorded file, press STOP button to select the folder you prefer.
Page 59
(4) Press “+” and “-” to adjust volume. (5) Press STOP to stop playing. When the playing is stopped, press down the MENU button for about 2 seconds to return to the main interface. (6) When playing, press PLAY to pause, press PLAY again to continue playing.
Page 60
mode you need to reference the interface as shown below: Sequence: play the file selected directory in order, all played out a times the current directory's documents to be automatic stop playing. Repeat One: play current music repeatly. Repeat Folder: play all files in the selected folder. Random: randomly play the selected folder.
Page 61
(4) Replay interval Replay interval means the time interval between two replays. You can select “Replay interval” option in the play menu list, then press Menu button to enter into setting of Replay interval. Adjust the time of Replay interval (time unit: second) by “ ”...
Page 62
backward. The reference interface is shown as below: (7) Details Get detailed information of the playing file from this menu, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below: Delete Files On the playing music interface, press the DELETE for about 2 seconds, the interface of the following picture will appear.
8 Music Mode From the main interface, you can choose music mode with “ ” or “ ” buttons, and then shortly press the MENU button to enter. Files list interface is as follows: Then, shortly press the Play button to enter the music playback interface.
Page 64
You can select the music you want to play by pressing “ ” and “ ”, then press PLAY to play the music. When playing, shortly press the MENU button, the below menu pops up with modes: EQ mode, Play mode, Display mode, AB replay, Replay times, Replay interval, Variable Speed, Scan speed and Information.
Page 65
Sequence: play files sequentially from selected folder. After playing all the files in the current folder, the playing stops automatically. Repeat one: repeat continuously the selected file. Repeat Folder: repeat playing files from the selected folder. Random: randomly play files in selected folder. (3) Display Mode Select “Display Mode”...
Page 66
Note: 1. The lyric file name should be in accordance with music file name. 2. The display screen will shows the lyric if the proper lyric file is available. (4) AB Replay From the menu list, select “AB Replay”, press MENU button to enter. Set AB Replay •...
Page 67
playing. Shortly press “MENU” button to cancel the AB marks and return to normal playing. (5) Replay times Select “Replay times” option in play menu list, then press Menu button to enter into setting menu of Replay times. Adjust the times by “...
Page 68
play speed by“ ” or “ ” button. The reference interface is shown as below: (8) Scan speed Select “Scan Speed” option in play menu list, then press Menu button to enter into the setting menu of Scan speed. Adjust the Scan speed by “...
Page 69
Delete Files On the stopped playing interface, press the DELETE button for about 2 seconds, the interface of the following picture will appear. Below are the pictures of the deletion operations: If the device shows the interface on the left side, press “+” or “-” button to select individual or all files;...
9 Video Mode On the main interface, we can select video mode by “ ”or“ ” button, and then press the Menu button to enter into the interface of file list. The interface of file list is shown as below: Shortly press Play button to enter into the interface of video play.
Page 71
(1) Play mode When an option is selected, the corresponding area will turn yellow. As the above picture shows, when you select “Play Mode” option and then press Menu button, it will enter into selection menu of play mode. You can select play mode you want. The reference interface is shown as below: Sequence: Play the selected files of the list in order.
Page 72
(3) Display mode Select “Display Mode” option in play menu list, then press Menu button to enter into the menu of display mode. You can select the mode by “ ” or “ ” button and press Menu button for confirmation.
Page 73
reference picture showing deleting steps are as below: If the device shows the interface on the left side, select “+” or “-” button to choose to delete single file or all files. If the device shows the interface on the left side, select “YES” to confirm deleting or “NO”...
10 Radio Mode From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode: frequency mode user mode In radio mode, there are “user mode” and “frequency mode” to switch, if some radio channels have been already saved. Short press PLAY button to switch between the two modes;...
Page 75
saved automatically and the radio channel number is saved in the channel list. In the frequency mode, users can save channels in a manual way. In user mode, users can choose Delete Channel to delete a current saved channel or Delete all saved channels. The device can store 40 radio channels at most.
11 Setting Mode From the main menu select Setting mode, press MENU button to enter. The Setting mode interface includes: Select Memory, Select Folder, Record Type, Voice Activate Control, Listen In, Auto Divide Feature Recording, Backlight, Auto off, System Time, Recorder Timer, Language and Advanced.
Page 77
Note: PCM recordings are only stored in internal memory of the device. (2) Select Folder The recorded file can be stored in any of the A, B, C, D folder. See the interface picture below: (3) Record Type From the Record Type Menu users have five Record types for selection: PCM Record, SHQ Record, HQ Record, SP Record and SLP Record.
Page 78
Telephone Record Connect the telephone cable provided with the device and external telephone cable to the telephone adapter. According to the drawing, the operation is the same as recording with microphone. Line in Record: Line in recording is a way of recording sound by connecting the device to an audio equipment’s audio output via a stereo audio cable (audio equipments such as radio, CD, VCD, DVD etc.).
Page 79
(4) Voice-activated Recording This is a practical function of recording, no button operation is needed. When the function is enabled, in the course of recording, if no voice is detected, the device will automatically pause recording after 3 seconds; if voice is detected again, the device resumes recording.
Page 80
(7) Backlight Time The backlight time function can be set at: 15, 30, 45, 60 seconds and Constant. If there’s no operation on the device for the set time, the backlight turns off automatically. If you select 0, the backlight is to be always.
Page 81
On this interface, users can set the current time and the time display format. For example, when select” Time Mode” , the device shows the picture as follow: From the list, users can choose one of two time display format: 12-hour clock or 24-hour clock.
Page 82
From the menu list, select “Record Timer” to enter to set the record timer. See the below auto off picture: The interface of Record Time is as follow: On this interface, users can set the time when the device starts recording automatically.
Page 83
Users can set the duration of recording to 30 minutes, 60 minutes, and 120 minutes or unlimited. See the below auto off picture: Note: After the duration was set, please make sure the switch is in the position of ON when the device is power off, otherwise the device will not start recording when it reaches the preset time.
Page 84
Information : users can check the device’s firmware version check the remaining capacity of memory by using this function. Clear internal memory : users can format the device’s internal memory by using this function. Clear card memory:users can format the device’s card memory using this function.
Answers to the frequently asked questions are listed here to solve simple problems that may to the device. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support Cannot switch on the device: The battery is empty, please recharge promptly.