Radio - Kenwood DDX6016BT Instruction Manual

RADIO

RADIO
Listening to the radio
❏ Indications and buttons on the source
control screen
1 2
3 4 5 6 7 8 9
Radio reception information
1 Text information
• Pressing [< ] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
2 The station frequency currently tuned in
3 Standby reception indicators (NEWS/TI)
4 AF indicator
5 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
6 Seek mode
7 LO.S indicator (Page 29)
8 RDS indicator: Lights up when receiving a Radio
Data System station.
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
28
Operation buttons
Displays the other operation button
[ ]
window.
• To hide the window, press [
[AM] Selects the AM band.
[FM]
Selects the FM band.
Displays the preset station window.
[ ]
(Page 30)
• To hide the window, press [
[P1] – [P5] • Selects a stored station. (Press)
• Stores the current station. (Hold)
Displays the <Equalizer> screen.
[ ]
(Page 46)
[PTY]*
Enters PTY search mode. (Page 30)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method differs
according to the selected seek
]. mode. (See the left column.)
Presets stations automatically. (Hold)
[AME ]*
(Page 29)
[MONO]* Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
].
monaural mode is activated.
[TI]* Activates/deactivates TI standby
reception mode. (Page 30)
[MODE]* Changes the settings for radio
reception on the <Radio Mode>
screen. (Pages 29 and 31)
• To display all available operation buttons, press
[ ] to display the other operation button
window.
* Appears only when FM is selected as the source.