Sanyo SAP–K301AH Technical & Service Manual page 51

(1) Operation mode
AUTO.......................................
COOL .......................................
HEAT........................................
MILD DRY................................
(2) Fan speed
Automatic operation ..............
HIGH ........................................
MEDIUM..................................
LOW.........................................
OI-400-07EG
Remote Control Unit (Display)
Displayed when setting temperature
Displayed when transmitting data
Displayed when main unit sensor is in use
Displayed when temperature is shown
Displayed when the temperature setting is at the
upper or lower allowable limit
Displayed when setting timer
Symbols
(3) Set temperature
(4) Timer
(5) NIGHT SETBACK ....................
(6) Confirmation of
(7) Flap angle indication .............
(8) Sweep indication....................
16–30°C
When set to 28°C ............
12-hour ON Timer..................
12-hour OFF Timer.................
1-hour OFF Timer...................
transmission ...........................
C
ON
OFF
1
HR.
7