Preset Recall; Preset Save - QSC GXD Quick Start Manual

Main Navigation Menu
Figure 9
See
From HOME ENTER
1. Previous selection – PRESETS
2. Currently selected – STEREO DSP (or DSP A and DSP B)
3. Next selection – UTILITIES
4. Instructions
Confi gurations
There are four basic types of confi guration:
• Figure 10 – 2-channels in, stereo DSP, 2-channels out – Channel controls are linked, audio signals are not combined. (P1 through P7)
• Figure 11 – 2-channels in, separate DSP, 2-channels out – Channel controls are not linked except Sensitivity. (P8 through P10)
• Figure 12 – 1 or 2-channels in (mono summing), separate DSP, 2-channels out – Channel controls are not linked except Sensitivity. (P11 through P18)
• Figure 13 – 1 or 2-channels in (mono summing), stereo DSP, 2-channels out – Channel controls are linked, audio signals are combined. (P19 and P20)
The confi gurations are selected using the presets. Refer to the GXD User Manual for details of all 20 available confi gurations.
PRESETS
A preset confi gures the inputs and outputs, along with setting the DSP. When you make changes to the DSP, you can save your setup in any of the 20
preset locations.
View Current Preset Confi guration
From HOME HOME
To return HOME

PRESET RECALL

Recall a preset to confi gure the amplifi er to meet the requirements of your loudspeakers and installation.
Figure 15
There are 20 Presets. See
1. From HOME ENTER
2. B PRESET,
3. B PRESET RECALL,
4. B the preset you want,

PRESET SAVE

Saves the active preset with any DSP changes. See
1. From HOME ENTER
2. B PRESET,
3. B PRESET SAVE,
TD-000449-00-C
1
ST
DSP
2
— Figure 10 —
ENTER
ENTER
ENTER ENTER
Figure 16
ENTER
ENTER ENTER
A
A 1 DSP
B 2 DSP B
— Figure 11 —
5
P1: ST SAT FULL RANGE
1 PRESETS
STEREO DSP
2
3 UTILITIES
4 ENTER TO SELECT
— Figure 9 —
1 DSP A
1
ST
DSP
2 DSP B 2
— Figure 12 —
— Figure 13 —
+ P1: ST SAT FULLRANGE
1 A
ST
DSP
2
B
HOME TO RETURN
— Figure 14 —
PRESET > RECALL
P20: MONO SUBS 100 HZ
1 A
ST
DSP
2 B
ENTER TO SELECT
— Figure 15 —
P1: ST SAT FULL RANGE
PRESET RECALL
PRESET SAVE
PRESET SAVE AS
ENTER TO SELECT
— Figure 16 —
A
B