Manual Exposure Adjustment - Canon FS46 Instruction Manual

Applying the Selected Digital Effect
1 Open (
2 Select (
press
• The icon of the selected digital effect
turns green.
• Press
effect (its icon will turn white again).
To fade in/out
Activate the selected fader in record pause mode (
Start/Stop
while recording (
recording.
To activate an effect
For movies: Activate the selected effect while recording or in record
pause mode.
For photos: Activate the selected effect and then press
record the photo.
NOTES
• When you apply a fader, not only the picture but also the sound will
fade in or out. When you apply an effect, the sound will be recorded
normally.
• Faders cannot be used when recording video snapshot scenes or
when pre-recording is activated.

Manual Exposure Adjustment

At times, backlit subjects may appear too dark (underexposed) or
subjects under very strong lights may appear too bright or glaring
(overexposed). To correct this, you can manually adjust the exposure.
Operating modes:
Downloaded From VideoCamera-Manual.com Manuals
) the joystick guide.
) [ Digital Effects] and
.
again to deactivate the digital
to start recording with a fade in. Activate the selected fader
), then press Start/Stop to fade out and pause the
Digital Effects
), then press
PHOTO
Video
to
53