Canon FS46 Instruction Manual page 38

2 When you wish to resume recording, open the LCD panel.
The ON/OFF (CHG) indicator turns back green and the camcorder is
ready to record.
IMPORTANT
• Do not disconnect the power source during standby mode (while the
ON/OFF (CHG) indicator is lit in orange).
NOTES
• The camcorder will not enter standby mode if the LCD panel is closed
while the ACCESS indicator is on or flashing, while a menu is being dis-
played, or while the PHOTO button is pressed down halfway. The cam-
corder may also not enter standby mode if the LCD panel is closed
while the memory card slot cover is open or when the battery charge is
too low. Check that the ON/OFF (CHG) indicator changes to orange.
• The camcorder will shut off if left in standby mode for 10 minutes,
regardless of the
to turn on the camcorder.
• You can select the length of time until shut-off or turn off the Quick
Start function altogether with the
Downloaded From VideoCamera-Manual.com Manuals
38
Video
[Power Saving Mode] setting. Press
[Quick Start] setting.
POWER