Canon FS46 Instruction Manual page 105

Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (
memory card using the [Complete Initialization] option (
a different memory card.
Cannot play the movies in the built-in memory Initialize only using the camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in
memory with this camcorder (
Cannot play the movies on this memory card
- Movies cannot be played back from a 64 MB or smaller memory card. Use a recommended
memory card (
Cannot play the movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Cannot record
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
Cannot record Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings (
built-in memory using the [Complete Initialization] option (
contact a Canon Service Center.
Cannot record Check the memory card
- There is a problem with the memory card. Save your recordings (
memory card using the [Complete Initialization] option (
a different memory card.
Cannot record movies in the built-in memory Initialize only using the camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in
memory with this camcorder (
Cannot record movies on this memory card
- Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended mem-
ory card (
Cannot record movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Change the battery pack
- Battery pack is exhausted. Replace or charge the battery pack.
Check the memory card
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
Downloaded From VideoCamera-Manual.com Manuals
28).
31).
28).
31).
31).
31).
79) and initialize the
31). If the problem persists, use
79) and initialize the
31). If the problem persists,
79) and initialize the
31). If the problem persists, use
Additional Information
105