Table of Contents
Advertisement
Downloaded From DvDPlayer-Manual.com Samsung Manuals
M
When you are recording at EP mode on a DVD-RW(V mode)/-
R disc, it may not record the full 6 or 8 hours because the unit
uses the VBR(Variable Bit Rate) ENCODING system. For
example, if you record a programme with a lot of action,
it uses a higher bit rate which in turn consumes more disc
memory.
•
PDC : PDC(Programme Delivery Control) function.
- If you set this function on, you can control the starting and
ending time of recording by special signal included in the
broadcasting signal. If a TV programme is shortened or starts
earlier or later than scheduled, this function synchronizes the
starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV
schedule. Otherwise the timer recording will not operate.
- Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC.
•
TITLE : To label the title name, press the RED(A) button.
Title renaming screen appears.
Follow steps 4 and 5 of "Renaming (Labeling) a Title" on page 73.
5.
After selecting the set up value for each mode, press the OK button
to select Save.
•
will appear on the front panel. It means that a timer recording
is registered.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of
the fi rst programme is complete, the second programme starts
being recorded.
To exit without saving the current setting
Press the EXIT (
) button.
To return to the previous menu
Press the RETURN button if you don't want to set a timer recording.
6.
When you want to recording on DVD-RAM/-RW/-R, you must insert
the disc.
7.
Turn the power off to fi nish the Timer Recording setting.
Timer Recording will not work when the power is on.
M
The timer recording time may differ from the set time
depending on disc status and overall timer recording status (for
example, recording times overlapping, or when the previous
recording ends within 2 minutes before the start time of the
next recording.)
You can make the Timer Recording up to 12 programmes.
If HDD disk has no available recording space,
means that HDD disk has no space to record.
If you have set the Timer Recording using PDC, the fan can
still operate and make a noise when the power is off.
English - 67
blinks. It
Advertisement
Chapters
Table of Contents
