Radiator Coolant Level - Polaris Ranger 4x4 500 EFI Owner's Manual

Cooling System

Radiator Coolant Level

Always check and clean the screen and radiator fins at the intervals out-
lined in the Periodic Maintenance Chart beginning on page 54. Do not
obstruct or deflect air flow through the radiator by installing unautho-
rized accessories in front of the radiator or behind the cooling fan. Inter-
ference with the radiator air flow can lead to overheating and
consequentially, engine damage.
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
1. Lift the hood.
2. Slowly remove the radiator cap.
3. View the coolant level through
the opening.
4. Use a funnel and slowly add
coolant as needed.
NOTE:
This procedure is required
only if the cooling system has
been drained for maintenance
and/or repair. But if the over-
flow bottle has run dry, the
level in the radiator should
also be inspected.
NOTE:
Use of a non-standard pressure cap will not allow the recovery system
to function properly. See your dealer for the correct replacement part.
CAUTION
MAINTENANCE
73