Storage Tips; Battery Maintenance - Polaris Ranger 4x4 500 EFI Owner's Manual

Hide thumbs Also See for Ranger 4x4 500 EFI:
Table of Contents

Advertisement

Cleaning and Storage

Storage Tips

Starting the engine during the storage period will disturb the protective film
created by fogging and damage could occur. Never start the engine during
the storage period.
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See
page 100.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.
Follow the instructions on the container for the recommended
amount.
NOTE:
Carbon Clean removes water from fuel systems, stabilizes fuel and
removes carbon deposits from pistons, rings, valves and exhaust sys-
tems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to
disperse through the entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 62.
Air Filter / Air Box
Inspect and clean or replace the pre-cleaner and air filter. See page 78.
Clean the air box. Drain the sediment tube.
Inspect and Lubricate
Inspect all cables and lubricate all areas of the vehicle as recommended
in the Periodic Maintenance Chart beginning on page 54.

Battery Maintenance

See pages 97-99 for storage and charging procedures.
NOTICE
MAINTENANCE
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents