Installing and Connecting the Projection TV (continued)
Connecting an amplifier with
Dolby Pro Logic decoder
If you use an amplifier with Dolby Pro Logic
decoder instead of the projection TV's audio
system, you can still use the projection TV's
center speaker.
1
Using the speaker cords (supplied with
the amplifier), connect the speaker
terminals on your amplifier to CENTER
SPEAKER IN +/– on your projection TV.
2
Using AUDIO/VIDEO connectors,
connect AUDIO (FIX) OUT on your
projection TV to one of the unused Line
inputs (e.g. Tape-2, AUX1, etc.) on your
amplifier (White-AUDIO Left, red-
AUDIO Right).
3
Set your amplifier to the chosen Line
input and use the AUDIO menu to set
"SPEAKER" to "CENTER IN" on your
projection TV. (see "SPEAKER" on page
38)
18
AUDIO
(FIX) OUT-L
(white)
* Manufactured under license from
Dolby Laboratories Licensing
Corporation. Additionally licensed
under Canadian patent number
1,037,877. "Dolby," the double-D
symbol a and "Pro Logic" are
trademarks of Dolby Laboratories
Licensing Corporation.
Disconnect all power sources before making any connections.
(Rear of projection TV)
L
R
CENTER IN '
CENTER IN '
AUDIO OUT
FIX
VAR
L
R
AUDIO (FIX) OUT-R
(red)
2
RK-74A (not supplied)
Line input
Amplifier with Dolby*
Pro Logic decoder
Rear
speaker (L)
Front
speaker (L)
1
Rear
speaker (R)
Front
speaker (R)