Sony KP-53XBR200 Operating Instructions Manual page 58

Troubleshooting (continued)
Dark, poor or no picture (screen lit), good
sound
• Adjust PICTURE in the VIDEO menu.
(see "PICTURE" on page 35)
• Adjust BRIGHTNESS in the VIDEO menu.
(see "BRIGHTNESS" on page 35)
• Check antenna/cable connections.
• Perform AUTO SET UP again using the SET
UP button to return to the factory preset
condition. (see "To perform AUTO SET UP
again" on page 24)
• Adjust the convergence again using the AUTO
FOCUS button. (see "Adjusting the
convergence automatically (AUTO FOCUS)
on page 24")
Good picture, no sound
• Press MUTING so that "MUTING" disappears
from the screen.
(see "MUTING" on page 25)
• Check the MTS setting in the AUDIO menu.
(see "MTS" on page 38)
• Make sure SPEAKER is set to ALL ON or L/R
OFF in the AUDIO menu. (see "SPEAKER" on
page 38)
• Perform AUTO SET UP again using the SET
UP button to return to the factory preset
condition. (see "To perform AUTO SET UP
again" on page 24)
56
Cannot receive upper channels (UHF) when
using an antenna
• Make sure CABLE is OFF in the CHANNEL
SET UP menu. (see "CABLE" on page 44)
• Use AUTO PROGRAM to add receivable
channels that are not presently in TV
memory. (see "AUTO PROGRAM" on page
44)
No color
• Adjust the COLOR in the VIDEO menu. (see
"COLOR" on page 35)
• Black and white programs cannot be seen in
color.
• Perform AUTO SET UP again using the SET
UP button to return to the factory preset
condition. (see "To perform AUTO SET UP
again" on page 24)
Only snow and noise appear on the screen
• Check the CABLE setting in the CHANNEL
SET UP menu. (see "CABLE" on page 44)
• Check the antenna/cable connections.
• Make sure the channel is broadcasting
programs.
• Press ANT to change the input mode.
(see "ANT" on page 27)
Dotted lines or stripes
• Adjust the antenna.
• Move the projection TV away from noise
sources such as cars, neon signs or hair-
dryers.
Noisy picture (when DRC is set to HIGH in
the VIDEO menu)
• Soften the sharpness using SHARPNESS in
the VIDEO menu.
TV is fixed to one channel
• Try turning CHANNEL FIX off.
(see "CHANNEL FIX" on page 45)
• Use AUTO PROGRAM to add receivable
channels that are not presently in the TV
memory. (see "AUTO PROGRAM" on page
44)
Double images or ghosts
• Use a highly directional outdoor antenna or a
cable (when the problem is caused by
reflections from nearby mountains or tall
buildings).
Cannot operate menu
• If the item you want to choose appears in
gray, you cannot select it. Press TV/VIDEO
correctly.