B Options; Optional Paper Tray (Lt-5400); Memory Board; So-Dimm Types - Brother MFC-8510DN Advanced User's Manual

B
Options
Optional paper tray
(LT-5400)
An optional lower tray can be installed on
MFC-8510DN and MFC-8520DN, and it can
hold up to 500 sheets of 80 g/m
When an optional tray is installed, the
machine can hold up to 800 sheets of plain
paper.
For setup, see the Instructions that we have
supplied with the lower tray unit.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.

Memory board

MFC-8520DN has 128 MB of standard
B
memory, and MFC-8510DN has 64 MB. Both
models have one slot for optional memory
expansion. You can increase the memory up
2
paper.
to maximum of 384 MB for MFC-8520DN and
320 MB for MFC-8510DN by installing one
SO-DIMM (Small Outline Dual In-line
Memory Module).

SO-DIMM Types

You can install the following SO-DIMMs:


• For more information, visit the Kingston
• For more information, visit the Transcend
In general, the SO-DIMM must have the
following specifications:
Type
CAS latency
Clock
frequency
Capacity
Height
DRAM type
• There might be some SO-DIMMs that will
• For more information, call the dealer you
256 MB Kingston KTH-LJ2015/256
256 MB Transcend TS256MHP423A
Note
Technology website at
http://www.kingston.com/.
website at http://www.transcend.com.tw/.
144-pin and 16-bit output
4
267 MHz (533 Mb/S/Pin) or
more
256 MB
30.0 mm
DDR2 SDRAM
Note
not work with the machine.
bought the machine from or Brother
Customer Service.
B
B
B
B
59