Using The Dusting Kit - Shark NV360 Series Owner's Manual

Using the Dusting Kit

Press
Button
a
Fig. 16
USING THE DUSTING KIT WITH THE EXTENSION
WAND
Use to remove dust from hard floors, furniture,
ceiling fans, blinds, and other delicate surfaces.
1
Press the extension wand release button (a) and pull
the extension wand up. (Fig. 16)
2 Insert the extension wand onto the end. (Fig. 17)
3 Insert the duster into the extension wand. (Fig. 17)
4 Attach the microfibre pad. (Fig. 18)
13 1-800-798-7398
Fig. 17
CARE FOR PADS
1
Wash the pads separately with warm water either
in the washing machine or by hand using liquid
detergent.
2
Do not use bleach or fabric softeners as they may
damage or leave a coating that will reduce the
cleaning performance of the pads.
3
Tumble dry low or line dry to extend the life of the
microfibre fabric.
REPLACE PADS
1
For best floor cleaning results, we recommend
replacing your microfibre pads every 3-4 months
following normal use.
2
You can find and purchase replacement microfibre
pads and accessories at
www.sharkninjamanuals.com
TO REPLACE THE MOTORISED FLOOR NOZZLE
FOR UPRIGHT CLEANING
1
Press the release at the bottom of the extension
wand and remove the hard floor attachment.
2
Replace the canister back onto the motorised floor
nozzle and re-insert the handle with extension wand
back into the top of the vacuum body until you hear
these click into place.
When attaching the motorised floor nozzle, ensure
that the locking mechanism is fully locked in place to
ensure electrical connection has been made.
Fig. 18