Stop Watch; Sounds Settings - Nokia 6215i User Manual

Notepad
To create a note, select
your note text (see "Text entry," p. 18), and select SAVE. To view or edit a note,
highlight the note, and select
Notepad > Options

Stop watch

The stop watch can be used for elapsed time measurement, such as for a sporting
event. Up to six events or records can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional instrument.
Therefore, Nokia advises against its use for official competitions or any other event
in which a high-precision device would be required to establish exact times.
To time a single event, select
The elapsed time is displayed in h:mm:ss:ms format. To stop or pause the stop watch,
select Stop. To resume the stop watch from the stopped time, select
reset the stop watch to zero, select
To time multiple events, select
Start. To mark the elapsed time for each event you are measuring, select
(up to six times). To display the event times, select View.

■ Sounds settings

To adjust volumes and assign sounds to phone calls and alarms, select
Settings & Tools > Sounds Settings
Master Volume—Use the volume keys or scroll key to change the volume setting
of your phone from
To silence the phone, scroll down, or press and hold the volume down key until
All Sounds Off is displayed. To preview the sound level, select Play.
Call Sounds—To set ringtones for incoming calls, select
phone to vibrate when a call is received, select
Alert Sounds—Select the alert type (Tone, Vibrate, or Reminder) for an incoming
TXT Message, PIX Message, or
Keypad Volume—Use the volume keys or scroll key to set the keypad volume from
Off to High.
Earpiece Volume—Use the volume keys or scroll key to set the earpiece volume
from Low to High.
Service Alerts—Set any of the alert options to
Menu > Settings & Tools
VIEW > Edit. To delete one note or all notes, select
> Erase or Erase All.
Menu > Settings & Tools
Reset
Menu >
and from the following options:
High to Low or to Alarm Only
Voicemail
S e t t i n g s a n d t o o l s
> Tools > Notepad
> Tools
with the watch in stopped mode.
Settings & Tools > Tools
or Vibrate
Call
Call Vibrate
Msg.
On or Off:
> New, enter
> Stop Watch > Start.
Start again. To
> Stop Watch >
Cont
Menu >
Only, then select OK.
Ringtone. To set the
> On.
41