Stop Watch; Sounds Settings - Nokia 6315i User Manual

Stop watch

The stop watch can be used for elapsed time measurement,
such as for a sporting event. Up to eight events or records
can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional
instrument. Therefore, Nokia advises against its use for official
competitions or any other event in which a high-precision
device would be required to establish exact times.
To time a single event, select
Tools > Stop Watch
h:mm:ss:ms format. To stop or pause the stop watch, select
Stop. To resume the stop watch from the stopped time, select
Start again. To reset the stop watch to zero, select
with the watch in stopped mode.
To time multiple events, select
Tools > Stop Watch
each event you are measuring, select Cont. To display the
event times, select View.

■ Sounds settings

To adjust volumes and assign sounds to phone calls and
alarms, select
and from the following options:
Master Volume—Use the volume keys or scroll key to change
the volume setting of your phone from
Only or Vibrate
down, or press and hold the volume down key until
Off is displayed. To preview the sound level, select Play.
Call Sounds—To set ringtones for incoming calls, select
Ringtone. To set the phone to vibrate when a call is received,
select Call Vibrate
Alert Sounds—Select the alert type (Tone, Vibrate, or Reminder)
for an incoming
> Start. The elapsed time is displayed in
> Start. To mark the elapsed time for
Menu > Settings & Tools
Only, then select OK. To silence the phone, scroll
> On.
TXT Message,
S e t t i n g s a n d t o o l s
Menu > Settings & Tools
Menu > Settings & Tools
> Sounds Settings
High
PIX Message, or
>
Reset
to Low or to Alarm
All Sounds
Call
Voicemail Msg.
>
63