Husqvarna 420 Operator's Manual page 66

General
Time & Date
This function allows you to set current time and required
time format in the robotic lawnmower.
Set time
Enter the correct time and press OK to exit.
Time format
Move the cursor to the required time format:
12h/24h. Finish by pressing OK.
Set date
Enter current date and press OK to exit.
Date format
Place the cursor at the required date format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year).
Exit by pressing OK.
Language
With this function, you can select the language that is
displayed in the menus. Place the cursor on the desired
language and press OK.
Country and time zone
Select the country in which the robotic lawnmower will
operate with this function. Place the cursor at the required
country and press OK.
Restore factory settings
Reset all user settings
This function allows you to reset the robotic lawnmower to
the default settings it had when it left the factory.
The following settings are not altered:
• Security level
• PIN Code
• Loop signal
• Messages
• Date & Time
• Language
• Country
1. Select Reset user settings in the menu and press
OK.
2. Confirm by pressing OK.
English - 64
1157866-26,420,430X,450X,EN_160314.indd 64
MENU FUNCTIONS
2016-03-14 16:59:47