Husqvarna 420 Operator's Manual page 50

Custom
This menu allows you to customize and combine the
available security functions to suit your needs.
Time lock
Activate or deactivate the PIN request after a certain
number of days. The number of days can be set in
Security - Advanced.
NB! Time lock is the most important theft-prevention
function and it is recommended to have it activated at all
times.
PIN if stopped
Activate or deactivate PIN request when the STOP button
has been pressed.
Alarm & PIN if stopped
Activate or deactivate alarm when the STOP button has
been pressed.
Alarm & PIN if lifted
Activate or deactivate alarm when the robotic lawnmower
is lifted e.g. if it is carried somewhere.
This function may need to be deactivated in working areas
where the robotic lawnmower has to be repeatedly lifted
due to collisions with for instance gently sloping stones or
tree roots.
Alarm & code if tilted
Activate or deactivate alarm when the robotic lawnmower
is tilted e.g. if it is carried somewhere.
Advanced
New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate a
new signal, for instance if two adjacent installations have
a very similar signal.
1. Place the robotic lawnmower in the charging
station to which the robotic lawnmower is to be
connected.
2. Select New loop signal in the menu and press OK.
3. Press OK and await confirmation that the loop
signal has been generated. This normally takes
about 10 seconds.
Change PIN code
Enter the new PIN code and press OK. Confirm by
entering the same code again and pressing OK. When
the PIN code has been changed, the message PIN code
accepted is displayed for a few seconds.
Make a note of the new PIN code on the designated line
in Memo on page 2.
English - 48
1157866-26,420,430X,450X,EN_160314.indd 48
MENU FUNCTIONS
3012-1239
2016-03-14 16:59:12