Husqvarna 420 Operator's Manual page 54

Lawn coverage
This menu function is used to steer the robotic lawnmower
to remote parts of a working area. This important function
is used to maintain an even mowing result in the entire
working area. In very complex yards with for instance
many areas which are joined by narrow passages, the
mowing result can be improved by making a number of
manual settings as described below.
It is also possible to test exit settings and to identify the
distance from the charging station to a remote area.
The factory settings in Automower® 430X and
Automower® 450X use a built-in GPS to check which
areas are mowed and thereby which areas need to be
mowed next. Automower® 430X and Automower® 450X
can in this way automatically get to parts of the working
area that are hard to reach.
IMPORTANT INFORMATION
No manual settings need to be made if
GPS assisted navigation is used.
The factory settings in Automower
lawnmower to follow the guide wire 300 meters in 20 % of
the times it leaves the charging station.
GPS assisted navigation
For Automower® 430X and Automower® 450X only.
GPS assisted navigation uses an inbuilt GPS to check
which areas are mowed and thereby which areas need
to be mowed next. After a number of days operating,
the robotic lawnmower creates a map of the working
area and where the guide wires are laid. In this way
the Automower® 430X and Automower® 450X can
automatically set distance and proportion for hard to
reach parts of the working area.
The automatic settings made by the robotic lawnmower
cannot be read in the display.
IMPORTANT INFORMATION
If the same robotic lawnmower is used
for two or more charging stations that are
close together (neighbors for instance),
the GPS assisted navigation can only be
used in one of the working areas. Other-
wise the digital map can be misleading
and the robotic lawnmower's lawn cover-
age can therefore be reduced.
English - 52
1157866-26,420,430X,450X,EN_160314.indd 52
MENU FUNCTIONS
420 allow the robotic
®
3012-1445
2016-03-14 16:59:16