Brother P-touch 1750 User Manual page 9

2
Pass the tape halfway through the long narrow hole in the stick.
3
Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4
Peel off the label backing.
NON-LAMINATED TAPE
Labels printed on non-laminated tapes can be folded
in half so that the inside edges of the two backing
pieces come off the label, enabling the backing to
easily be peeled off.
INSTANT-LETTERING TAPE (RUB-ON TRANSFERS)
Instant-lettering tape is used to transfer your text onto
paper. After printing the text onto instant-lettering tape and
cutting off the label, position the label on a sheet of paper.
By simply rubbing the instant lettering tape's non-printed
side with a stick, you can transfer the text directly onto the
paper.

Hold the tape very firmly and do not move it while
rubbing the tape.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an
iron set to a medium-high temperature (160 to 180 ˚C) to press down firmly for 10 to 15 sec-
onds. For more details, refer to the instructions included with the fabric tape cassette.
7