Starting The Programme - The End Of The Programme - Miele WMV 960 WPS Operating Instructions Manual

6. Starting the programme - the end of the programme

Starting the programme
 Touch the flashing Start/Stop sensor.
The door will lock ( will appear in the
display to show this) and the
programme will start.
The programme status will appear in
the display.
Cottons
Temperature
Spin speed
1
Main wash
Change
The washing machine lets you know
which section of the programme has
been reached  and the programme
duration remaining . If a Delay start
time has been selected, then this will
appear in the display.
The drum lighting switches off once the
programme has started.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will
appear alternately in the display:
and
crease Finished
The following information will also
appear:
Press the Stop button, then unload
the drum
 Touch the Start/Stop sensor. This will
unlock the door.
The door unlocks automatically at the
end of the Anti-crease phase.
40
10:30

60 °C
1600 rpm
h
1:45
2
Save
Anti-
.
 Pull open the door.
 Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
 Switch the washing machine off with
the  button.
 Close the door. Otherwise there is a
danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry. An open door is
also a danger to pets and children.
 If applicable, remove the used
capsule from the detergent
dispensing drawer.