Group Features - Panasonic KX-TDA50 Feature Manual

1.7 G
1.7.1

GROUP FEATURES

Description
This PBX supports various types of groups.
1.
Trunk Group
CO lines can be grouped into trunk groups based on carrier, CO line type, etc. Several settings can be
assigned on a trunk group basis. All CO lines belonging to a trunk group follow the programming for
that trunk group.
→ 2.9.1 [3-1-1] Trunk Group—TRG Settings
→ [402] LCOT Trunk Group Number
Each CO line can belong to only one trunk group. CO lines are assigned to a trunk group based on their
port numbers (for ELCOT, LCOT and PRI cards) or their channel numbers (for T1 cards).
2.
Extension User Group
Extensions can be grouped into extension user groups. Extension user groups then compose the
following groups:
a)
Tenant (→ 1.17.3 Tenant Service)
b)
Call Pickup Group (See below.)
c)
Paging Group (See below.)
Every extension must belong to one extension user group and cannot belong to more than one
extension user group.
→ 2.9.3 [3-2] Extension User Group
→ [603] Extension User Group
Assignable Extensions: Proprietary telephone (PT)/single line telephone (SLT)/portable station (PS)/
T1-OPX
[Example]
Extension User
Group 1
Extn. 100 Extn. 101
2.1
Call Pickup Group
Using the Group Call Pickup feature, extensions can answer any calls within the call pickup group
to which they belong. One extension user group can belong to several call pickup groups. (→ 1.3.6
Call Pickup)
→ 2.9.4 [3-3] Call Pickup Group
→ 2.9.5 [3-3] Call Pickup Group—All Setting
→ [650] Extension User Groups of a Pickup Group
Extension User Extension User
Group 2 Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Extension User
Group 4
Extn. 106 Extn. 107
1.7 G
Feature Manual 121