Security Code; Voice Privacy; Network - Nokia 6015 User Manual

Memory—Non-owner cards can
access UIM memory. Any changes
to the memory setting requires
the security code. The owner card
has access to all features, but the
security code is required to
change a memory setting
Phone—The security code is
required upon power-up.
4. A message appears in the display
confirming your selection.

Security code

Note: Avoid using codes
similar to emergency
numbers such as 911 to
prevent accidental dialling of
the emergency number.
The security code controls access to
security features in the
settings menu. The preset code is
12345. Once you change the
security code, keep the new code
secret and in a safe place separate
from your phone.
Note: If you enter the wrong
security code five times in
succession, you will not be
able to enter a code for five
minutes, even if you power
off the phone between
incorrect entries.
Security
Copyright © 2004 Nokia. All rights reserved.
S e t t i n g s ( M e n u 4 )
1. At the standby mode, select
Menu > Settings
settings > Access codes
security code.
2. Enter the current security code
(default is 12345), and press OK.
3. Enter the new security code (5
digits), and press OK.
4. Enter the new security code
again, and press OK.

Voice privacy

Voice privacy is a network service.
See "Network services", 9
information. If your wireless service
provider supports this feature, the
voice privacy feature protects the
privacy of your current phone
conversation from other callers
placing phone calls on your same

network.

1. At the standby mode, select
Menu > Settings
settings.
2. Select Voice privacy
■ Network
The menu options you see in your
phone are based on your service
provider's network. The network
determines which options actually
appear in the phone menu. Check
with your service provider for more
information.
> Security
> Change
for more
> Security
> On or Off.
55