Cleaning and maintenance
Cleaning the shaver in the SmartClean system
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the appliance.
3 Hold the beard styler attachment perpendicular
to the skin and move the appliance downwards
while you exert gentle pressure.
4 Clean the attachment after use (see 'Cleaning
and maintenance').
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your appliance.
The SmartClean system comes in two types. The
features available on your SmartClean system
differ per type:
- SmartClean system Basic has one phase: the
rinsing phase.
- SmartClean system Plus has two phases: the
rinsing phase and the drying phase.
21
English