Connecting The Dc Power Cords - HP 6600 User Manual

5. Put the power module to the correct position. Holding the power
module handle with one hand and supporting the power module
bottom with the other hand, plug the power module into the slot
along the slide rails.
6. Use the Phillips screwdriver to fasten the captive screws on the
power module until the power module is fixed to the chassis.
Figure 8 Install the DC power module

Connecting the DC power cords

Figure 9 Connect the DC power cords
+
Follow these steps to connect the DC power cords:
1. Plug one end of the shipped DC power cord marked with "–", a
blue power cord, into the terminal marked with "–", and fasten the
screw to fix the cord.
-
14