Sony RDR-GXD455 Operating Instructions Manual page 38

Button Operation Disc
.....
#;gl/.$~w~
Fast reverses or fast forwards the disc when pressed All discs
(fast reverse/fast during playback.
forward) Search speed changes with each press:
*1 FFI with sound
(Scan Audio) is
fast reverse fast forward
available for DVDs
FRI
+---
--+
FFI *1
with Dolby Digital
FR2*2
+--- +--- --+ --+
FF2*2
soundtracks.
FR3 *3
+--- +--- +---
--+ --+ --+
FF3* 3
*2 FR2 and FF2 are not
available for MP3.
*3 FR3 and FF3 are only
available for DVDs
and VIDEO CDs.
.
~~./.~~'
. .
Plays in slow motion when pressed in pause mode.
~li1EmlI!I
(slow)
Playback speed changes with each press:
IImJII
Im'liI IIIi.III
reverse slow motion forward slow motion
I!l!a~m!l*
...... 3
+--- --+
3.~
*
Playback direction
...... 2
+--- +---
--+ --+
2.~
...... 1
+--- +--- +--- --+ --+ --+
1 .~
only
II PAUSE
Pauses playback. All discs
If you pause playback for more than five minutes,
playback starts automatically.
To resume normal playback after playing at various speeds, press
t:>
PLAY.
38
~Q'
Hints
• You can change playback options, such as subtitle,
audio track, etc., using the OPTIONS menu (page 11).
• During playback or pause mode, you can also use the
~ /~
buttons on the recorder as the remote's
..... /~ buttons. Hold the buttons down during
playback to fast forward or fast reverse. In pause mode,
you can play in slow motion. Three speeds are
available, depending on the duration of the press.
• See "DVD Audio/Subtitle Language" on page 102 for
the meaning of the language abbreviation.
• If you pause playback of a CD, or DATA CD/DATA
DVD containing MP3 audio tracks, playback will not
start until you press
[::::::>
PLAY or II PAUSE.
• Sound will be interrupted during Scan Audio
(page 39).
Notes on playing DTS soundtracks on a CD
When playing DTS-encoded CDs, excessive noise
will be heard from the analog stereo jacks. To
avoid possible damage to the audio system, the
consumer should take proper precautions when
the analog stereo jacks of the recorder are
connected to an amplification system. To enjoy
DTS Digital Surround™ playback, an external
5 . I-channel decoder system must be connected to
the digital jack of the recorder.
Notes on playing DVDs with a DTS soundtrack
DTS audio signals are output only through the
DIGITAL AUDIO OUT (COAXIAL or
OPTICAL)/HDMI OUT jacks.
When you playa DVD with DTS soundtracks, set
"Digital Out" - "DTS" to "On" of "Audio" in the
"Setup" display (page
81).
If you connect the recorder to audio equipment
without a DTS decoder, do not set "DTS" to "On"
in "Audio" setup. A loud noise (or no sound) may
come out from the speakers, which might disturb
your ears or cause damage to the speakers.