Sony RDR-GXD455 Operating Instructions Manual page 130

step2Setu
The Easy Setup display automatically appears on your TV screen when you turn
on your recorder for the first time. Follow the steps below to make the minimum
number of basic adjustments to use the recorder.
If you make a mistake, press
en
RETURN.
After this setup, you can
receive ATSC, NTSC, and
CATV channels.
When "Finish" appears, press
ENTER to complete Easy
Setup.
9
Press
t/'"
to select "Manual" and
press ENTER.
Press
t/..
to set the month and press ....
Set the day, year, hour, minutes, and AM/PM
in the same way. Then press ENTER.
11
Press
t/'"
to select the type of
Dolby Digital signal you want
to send to your AV amplifier
(receiver), then press ENTER.
If your AV amplifier (receiver) has a Dolby
Digital decoder, select "Dolby Digital." If not,
select "D-PCM."
7
Press
t"J
to select
whether or not you have a cable
connection, and press ENTER.
If you have cable, select "Cable."
If not, select "Antenna."
13
12
Press
t/'"
to select the type of
DTS signal you want to send
to your AV amplifier (receiver),
then press ENTER.
If your AV amplifier has a DTS decoder,
select "On." If not, select "Off."
8
The Tuner Preset function
automatically starts searching
for all of the receivable analog
channels and presets them.
After searching for analog
channels is done, receivable
digital channels are searched for
automatically.
• This may take 40 minutes or more to
complete.
• If you press ENTER during search for
channels, the recorder will stop searching
for channels and advance the next step.
10
Press
t/'"
to select the type
of TV you have, then press
ENTER.
If you have a wide-screen TV, select "16:9."
If you have a standard TV, select either "4:3
Letter Box"(shrink to fit) or "4:3 Pan Scan"
(stretch to fit). This will determine how "wide-
screen" images are displayed on your TV.
Press
t/'"
to select a language for
the on-screen display, then press
ENTER.
Switch the input selector on
your TV so that the signal from
the recorder appears on your TV
screen.
1/6 (on/standby)
6
Press ENTER.
4
Press ENTER.
5
If "Initial setting necessary to operate the
DVD recorder will be made. You can change
them later using setup." does not appear on
your TV screen, select "Easy Setup" from
"Setup" in the System Menu.
2
Press 1/6 on the DVD recorder.
3
1
Turn on your TV and any other
connected equipment such as
your cable box or satellite receiver.
SYSTEM MENU