Table of Contents
Advertisement
appears below the running time.
Each time you select Split, the new
measured time appears at the
beginning of the list. The maximum
number of splits is 20.
Lap
timing—Use the lap time
function when you want to track
how long it takes to complete each
cycle or lap. Select
lap time. The clock stops, then
immediately restarts from zero. The
lap time appears below the running
time. Each time you select Lap, the
new measured time appears at the
beginning of the list. The maximum
number of laps is 20.
2. Select
Stop
to end timing and
display total time.
Save a time
To save a time while the clock is
running, select
Stop
name for the measurement, and select
OK. If you do not enter a name, the
total time is used as the default title
for the lap or split time.
Stopwatch options
In standby mode, select
Organiser
>
Stopwatch
following:
Continue—Continues to measure time.
Only appears if clock is running and
you are returning to stopwatch screen.
Copyright © 2006 Nokia. All rights reserved.
Lap
to note the
> Save, enter a
Menu
>
and one of the
Show last
time—View the last
measured time.
Split
timing—Use the split time
function.
Lap
timing—Use the lap time function.
View
times—Browse saved times.
Delete times
>
One by one
all—Delete saved times.
Operation note
If you press the end key and return to
standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
To return to the
Stopwatch
the following:
1. In standby mode, select
Organiser
>
Stopwatch
Continue.
2. To stop the clock, select Stop.
O r g a n i s e r
or
Delete
screen, do
Menu
>
>
75
Advertisement
Table of Contents
