Table of Contents
Advertisement
C o n t a c t s
■ Add new contacts
Save a name and number
1. In standby mode, enter the phone
number you wish to save.
2. Select Save.
3. Enter the name, and select
Done.
When you enter a number, you can
select
Options
>
Insert pause ('p')
insert a pause code or
wait ('w')
to insert a wait code.
See
"Insert dialling
codes", p. 34, for
more information.
Save a number (only)
In standby mode, enter the phone
number you wish to save, and select
and hold Options.
Save a contact
1. In standby mode, select
Contacts
>
Names
Add
new.
2. Enter the name, and select OK.
3. Enter the phone number, and select
OK.
Insert dialling codes
Insert special characters called dialling
codes into phone numbers such as
voice mail, and save the number to a
Speed dials
location. Dialling codes
34
Copyright © 2006 Nokia. All rights reserved.
instruct the receiving system to pause,
wait, bypass, or accept the numbers
that follow them in the dialling string.
Automate voice mail with dialling
codes. For more information, see
"Automate voice
Press * repeatedly to cycle through
OK
>
dialling codes. When the desired code
is displayed, pause briefly, and the
code is inserted into the dialling string.
to
The following dialling codes are
Options
>
Insert
available:
Dialling
code
*
+
p
Menu
>
w
>
Options
>
Save multiple numbers
You can save different types of phone
numbers per contact. The first number
you save for any entry is automatically
set as the default, but the default
number can always be changed.
mail", p. 28.
Indicates...
Bypasses a set of
instructions.
Causes the international
access code to be replaced
by +.
Pauses for 2.5 seconds
before sending any numbers
that follow.
Waits for you to press the
call key before sending the
numbers or codes that
follow.
Advertisement
Table of Contents
