Connect The Mains Supply - Sagem Photo Easy 255 User Manual

4 P
REPARE
C
ONNECT THE MAINS SUPPLY
Remark : When installing your printer near a wall or some other object, keep an open space
of at least 4 inches at the back of the printer, to make sure the movement of the
sheet of paper being printed is not obstructed.
Y P
OUR HOTO
Please refer to the safety instructions at the beginning of this user guide
before making any connections.
Insert one end of the mains lead into the corresponding socket of the
power supply.
Connect the power supply prug to the printer, pushing it in fully as
shown in the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Press the On/Off button
The language selection screen appears when you switch the printer on
for the first time. Use the browser's
you want and press the
The S and the message "Waiting for memory card or
other image source" are displayed on the screen.
E 255 P
ASY
until the red light comes on.
or
key to confirm.
- 6 -
RINTER
keys to select the language